1.Anti-loss function.Switch the receiver's adjustment wheel to the maximum receiving distance and push the power switch to the "Anti-loss ON ",the power-on warning tone alarms once,and the receiver makes the sound of clicks for warning tone study;push the switch of the transmitter to position "NO",the signal lamp of the transmitter flashes, it begins to transmit the signal,when the receiver receives the signal,it makes the sound of clicks and the signal lamp flashes,which means the code check is successful.
Note: if the receiver is on,(while the transmitter is off,)and makes the sound of clicks for study,check if other transmitter is in working status nearby.If the transmitter is on,the receiver still makes the sound of clicks; it means the receiver does not get the signal sent by the transmitter, check if the adjustment wheel is pushed to the right direction or the transmitter is in normal working status. 2.When the code check is successful,push the distance adjustment wheel to set the distance between you and the protected object. It is suggested to set about three meters for suitcase,wallet or bags.The distance for child or pet can be slightly far in accordance with the real conditions.
3.When the protected object are out of the setting distance, the receiver makes alarm.
4.The transmitter shall be attached to the protected object, while the receiver is held by you or pet owner.
(Periodically check its working status and battery volume.) (1)Transmitter signal lamp is weak or without signal →replace the transmitter battery (2)Receiver alarm is wear, the distance is not stable.and the signal lamp is week.
→replace the erceiver battery
(3)Battery replacement type: transmitter 3V CR2032×1
→receiver3V CR2032×2
(4)Load the battery
The details are shown in the following diagrams;